Menü

POLISHING PLATE LOADİNG AND UNLOADİNG
Marble slabs polishing line is used for unloading purposes at the entrance to the exit of the installation. Also the resin used for the purpose of loading and unloading lines. Loading and/or unloading process is fully automatically performs. All kinds of marble, travertine or granite plate for moving the vacuum system is possible and a different model produced.

POLISHING PLATE LOADİNG AND UNLOADİNG
Decker loading and unloading of the oven or tunnel oven is used. For installation in the front of the oven might work for loading and unloading as unloading at the exit from the same point in the process can make both in the type of Oven that you need. At the same time, the plate on the other face of the plate that can rotate 180 degrees to be made of epoxy makes it possible. A multipurpose loading and unloading a robot walking in place on the rails automar 180 yr.
The polishing of the plate with the lines in the output as can be mainly used for installation at the entrance of a much-needed machine. Because of the highly polished surfaces of the plates facing each other in the output has the ability to discharge by turning.

Storey kiln and tunnel kiln is used to make the process of loading and unloading automatically. Automar 600-180 poles are created on the paths that Air works like a gantry crane. - Storey car gang saw can download it directly from the oven. The process of the frontend and the back plate 180 degrees in the oven and turned the oven back sweat away made can give. Biren the process and the finished product take the plate puts it into the palette. Storey kiln can make the same point, so the loading and unloading process.